1:10

1:10 Brushless Set Thrust BL ECOV2 - 60A/3421KV

Our Thrust ECOV2 combo consisting of a sensorless brushless speed controller (ESC) and a 3421KV motor is designed for all owners of a 1:10 off-road or on-road vehicle. This system is ideal for converting from brushed to brushless or a complete rebuild. Thanks to the easy instalation and pre-confirigation from the factory, the set can be used immediately after installation.For ideal adaptation to the vehicle chassis, we recommend the use of a programming box, which is available separately (part number 2110062).With this box it is playfully easy to make the settings of the 10 different parameters. Highlights: • 2S & 3S LiPo suitable• Programmable via separately available programming box (2110062)• Ready-to-run out of the box Features Brushless ESC: • Water-proof 60A ESC incl. cooling fan• 2S & 3S LiPo suitable• T-Plug battery plug• Motor connection via 3.5mm gold contact plugs and sockets• Immediately ready to drive (no configuration necessary)• Easy calibration• Sensorless system• NiMH 4 - 9 cells & LiPo* 2 - 3 cells operation (*recommended)• Overheat protection 120°• Short-term load: 360A• BEC 7,4V/8,4V 6A (switch mode)• Multiple protection functions• Operating voltage 4.8 - 11.1V • Motor timing 18.75 deg. • LiPo voltage cutoff: 3.1V/cell (factory setting, programmable) Technichal Features ESC: • Dimensions (L/W/H): 50 x 35 x 37 mm • Weight incl. cable: 96 g• Motor limit @2S LiPo / 6 cells NiMH = On-road < 8T / Off-road < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T Features Brushless Motor: • Splash-proof• Aluminum housing • Sensorless operation • Overheat protection: 105° Technichal Features Motor: • 3421 KV • 27.400 RPM @ 7.4 Volt • 4 Pole • Operating voltage: 4.8 - 11.1V • Motor size: 540• Motor housing length: 52.0 mm• Motor housing Durchmesser: : 36.0 mm• Shaft length: 14.5 mm• Shaft Durchmesser: : 3,17 mm • Weight: 200 g Scope of delivery: • 1 pcs. Thrust Eco ESC (Item no. 2110007V2) • 1 pcs. Thrust Eco Motor (Item no. 2130005) • Manual (german/english/french) Recommended accessories: • Item 2110062 - Programm box for Thrust ECOV2 ESC

Sidewinder 4 Basher Combo 1406-5700k

SW4 SENSORLESS ESC BASHER EDITION W / 1406-4600 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.

Sidewinder 4 SCT Combo 1410-3800k

SW4 WP SENSORLESS ESC SCT EDITION W / 1410-3800 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1410-3800kv is perfect for short course trucks running on 2s LiPo and weighing up to 6.5 lbs; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.

Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 3300kV

Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 3300kV for 1/10 ScaleThis combo brings together the Ezrun MAX10 G2S speed controller at 80A and the Ezrun 3652SD G3 motor at 3300kV - a factory-matched Brushless drive package for 1/10 scale vehicles. The controller can be configured directly via smartphone: the Bluetooth module is integrated into the power switch, and the connection runs through the HW-LINK app for parameter tuning, data analysis, and firmware updates. Turbo Timing up to 20 degrees and the motor overheat protection are exclusively available with compatible Hobbywing motors and are ready to use out of the box with the included 3652SD G3.Ezrun MAX10 G2S FeaturesBluetooth module integrated in the power switch - smartphone programming without any additional deviceInternal data logging of the last 10 minutes of driving, graphically viewable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% higher top RPM with a compatible Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A continuous current (switch mode)Frameless fan with side air outlet, temperature-controlled activationController and motor waterproof to IP67, with waterproof sensor cableProtection against low voltage, overheating, and signal loss; capacitor overheat protectionXT60 input connector, gold-plated output connectorsEzrun 3652SD G3 Motor FeaturesBrushless sensored motor at 3300kV4-pole rotor for high torque, fast acceleration, and stable power deliveryCNC-machined aluminum housing with high-precision bearingsWaterproof to IP67Suitable for 1/10 on-road and off-road short course truck (light-duty)ESC SpecificationsType: 1/10 Brushless, sensored and sensorlessCurrent (continuous/peak): 80A / 520AInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV <= 6000 / 3S LiPo KV <= 4200Dimensions: 53 x 39.5 x 37.2 mm / Weight: 125 gMotor SpecificationsKV rating: 3300kV / No-load current: <= 3.9ACell count: 2-3S LiPo / Poles: 4Length: 53 mm / Diameter: 37 mm / Shaft diameter: 3.175 mmWeight: 228 gIncluded in the Box1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 Motor 3300kVRequired SeparatelyBattery: required separately (2S or 3S LiPo; at least 3S for 7.4V or 8.4V BEC output)Charger: required separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module

Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 4100kV

Brushless Combo Ezrun MAX10 G2S 80A with 3652SD G3 4100kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor 3652SD G3 (4100kV) in a factory-matched drivetrain package for the 1/10 scale. Programming is done directly via smartphone through the HW-LINK app with no additional devices required. Exclusively with Hobbywing motors: Turbo Timing up to 20 degrees for up to approx. 25% higher maximum RPM.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated in the switch - programming, data analysis and firmware update via HW-LINK appInternal data logging of the last 10 minutes of drive time, graphically viewable in the appTurbo Timing up to 20 degrees - activatable exclusively with Hobbywing motorsBEC with three levels: 6V / 7.4V / 8.4V at 5A (switch mode) - 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection functions: low voltage, overheat, signal loss, capacitor overheat protectionWaterproof to IP67, including waterproof sensor cableInput XT60, output gold-plated connectors; dimensions: 53 x 39.5 x 37.2 mm; weight: 125 gBrushless Motor Ezrun 3652SD G3 - Highlights4100kV, 4-pole rotor for high torque and fast accelerationCNC-machined aluminium housing, high-precision bearingsWaterproof to IP672-3S LiPo, no-load current max. 5.0A; length 53 mm, diameter 37 mm, shaft 3.175 mm; weight: 228 gApplication: 1/10 on-road / off-road short course truck (light-duty)Package Contents1x Ezrun MAX10 G2S Brushless ESC 80A1x Ezrun 3652SD G3 Brushless Motor 4100kVAdditionally RequiredBattery: 2-3S LiPo (not included); note: a minimum 3S battery is required for 7.4V or 8.4V BEC outputCharger: not includedOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module

Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 5400kV

Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 5400kV for 1/10The Hobbywing Ezrun MAX10 G2S Combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor Ezrun 3652SD G3 at 5400kV into a factory-matched drive system for 1/10 scale. The integrated Bluetooth module in the power switch enables programming, data analysis and firmware updates directly via smartphone through the HW-LINK app - no additional devices required. Internal data logging records the last 10 minutes of driving time for graphical analysis. Turbo Timing up to 20 degrees increases maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67.Key Features of the Brushless ESC Ezrun MAX10 G2SBluetooth module integrated in the power switch: smartphone programming via HW-LINK app, no extra hardware neededInternal data logging of the last 10 minutes of drive time, graphically analysable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% more maximum RPM with a compatible Hobbywing motor3-step BEC: 6V, 7.4V and 8.4V at 5A in switch mode (8.4V for high-voltage servos)Frameless fan with side air outlet, temperature-controlled activationProtection features: capacitor overheat protection, low-voltage cutoff, signal-loss protectionWaterproof to IP67, with waterproof sensor cableInput voltage: 2-3S LiPo; current: 80A continuous / 520A peakDimensions: 53 x 39.5 x 37.2 mm; weight: 125 g incl. cables and connectorsConnectors: XT60 input, gold-plated bullet outputKey Features of the Brushless Motor Ezrun 3652SD G3Brushless sensored motor at 5400kV for precise control4-pole rotor for high torque, fast acceleration and stable power deliveryCNC-machined aluminium housing and high-precision bearingsWaterproof to IP67Shaft diameter: 3.175 mm; length: 53 mm; diameter: 37 mm; weight: 227 gNo-load current: max. 6.8A; designed for 2S LiPoESC Technical SpecificationsType: 1/10 Brushless, sensored and sensorlessInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV max. 6000 / 3S LiPo KV max. 4200 (3652/3665 motors)Programming: Bluetooth (HW-LINK app), LCD programming box, OTA programming moduleApplication: 1/10 on-road, buggy, rally and short course truckPackage Contents1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 motor 5400kVOptional AccessoriesLCD Programming Box Pro (HW30502002)OTA Bluetooth Programming Module (HW30850400)Note: A minimum 3S battery is required for 7.4V or 8.4V BEC output. Bluetooth range is approx. 5 m by design. Battery and charger are not included.

Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 3200kV

Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 3200kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 140A ESC with the Ezrun 3665SD G3 Brushless motor in a factory-matched drive system for 1/10 short course trucks, trucks and monster trucks. The MAX10 G2S is programmed via Bluetooth directly through the HW-LINK app - no additional programming device required. The Bluetooth module is integrated into the switch and enables parameter setup, data analysis and firmware updates via smartphone. With Turbo Timing up to 32 degrees, the maximum RPM increases by up to approx. 25 % when used with the included Hobbywing motor. Both components are dust- and waterproof to IP67.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated into the switch - programming via HW-LINK app, no extra device neededInternal data logging of the last 10 minutes of driving time, graphically displayed in the appTurbo Timing up to 32 degrees - up to approx. 25 % higher top RPM with Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A (switch mode) for high-voltage servosInput: XT60, output: gold-contact connectorsFrameless fan with side air outlet, temperature-controlled activationProtection: low voltage, overheat, signal loss, capacitor overheatIP67 waterproof, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gCompatible with 2-4S LiPoBrushless Motor Ezrun 3665SD G3 - HighlightsBrushless sensored motor with 3200kV and 4-pole rotorHigh torque for fast acceleration and consistent power deliveryCNC-machined aluminium housing with high-precision bearingsIP67 waterproof, shaft diameter 5 mm, weight 304 gCompatible with 2-3S LiPoPackage Contents1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 3200kVAdditionally RequiredLiPo battery (2-4S, minimum 3S for 7.4V / 8.4V BEC output) - sold separatelyCharger - sold separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module

Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 4000kV

Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 4000kV for 1/10 ScaleThis factory-matched Brushless combo pairs the Ezrun MAX10 G2S ESC at 140A with the Ezrun 3665SD G3 motor at 4000kV for 1/10 scale vehicles. The integrated Bluetooth module in the switch allows direct smartphone programming via the HW-LINK app - no additional devices required. Turbo Timing up to 32 degrees boosts maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67, including a waterproof sensor cable.Brushless ESC Ezrun MAX10 G2S - SpecificationsContinuous / Peak current: 140A / 880AInput voltage: 2-4S LiPoBEC: 6V / 7.4V / 8.4V adjustable, 5A continuous (switch mode)Turbo Timing up to 32 degreesProgramming via Bluetooth (HW-LINK app), LCD programming box or OTA moduleInternal data logging of the last 10 minutes of driving timeThird BEC level at 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection against low voltage, overheating and signal lossWaterproof to IP67, XT60 input, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gBrushless Motor Ezrun 3665SD G3 - SpecificationsType: Brushless, Sensored, 4-poleSpeed: 4000kV, no-load current max. 8.2ACell count: 2-3S LiPoCNC-machined aluminium housing, high-precision bearingsLength: 65.8 mm, diameter: 37 mm, shaft diameter: 5 mm, weight: 297 gWaterproof to IP67Suitable for: 1/10 Short Course Truck, Truggy / MonsterIncluded in Delivery1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 4000kVRequired SeparatelyBattery: required separately (2-4S LiPo for ESC; 2-3S LiPo recommended for motor)Charger: required separatelyNote: A minimum 3S battery is required for 7.4V or 8.4V BEC outputOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module

Max10 G2 Combo 140A + 3665SD 3200kV G3

Max10 G2 Combo 140A + 3665SD 4000kV G3

Max10 G2 Combo 80A + 3652SD 3300kV G3

Max10 G2 Combo 80A + 3652SD 4100kV G3

1:10 SCT-Combo 80A/3660SL/2750kV/2-3S

TECHNICAL DATA MOTORMotor shaft: 5mm (diameter) / 18mm (length)Motor KV: 2750 (Umin/V)Lipo Cell count: 2-3SPoles: 4Type: SensorlessConnector system: 4mm Gold contact PlugMotor length: 60mmMotor diameter: 36mm (outside)Weight: approx. 256g>EMPOSED APPLICATION1/10 Monster1/10 Truggy & Trucks1/10 Short Course1/10 4WD BuggySupply Scope:80A Konect controller by HobbyWing2750kv / 3660SL Brushless motor by HobbyWingLCD programming card by HobbyWingProgramming cable for connecting the programming card to the controllerManual

Nosram Brushless Combo Pearl Evo v2 / Pure Evolution 5.5T

The new Pearl Evolution version 2 speed control and the Pure Evolution 8.5T brushless modified motor combine the two times World Championship winning brushless technology in an unbeatable combo of world class level modified racing! Step into the powerful world of brushless driving fun with NOSRAM! As a leading manufacturer of r/c speed controls and motors, NOSRAM can already look back upon years of expe-rience and multiple race victories around the world with brushless technology. NOSRAM brushless systems are the leading technology featuring extraordinary power and super smooth throttle response! Our brushless combos offer best performance at an attractive price! Get Started – the future is now! Key features Pearl Evolution version 2 • dual xps.mod software: independent adjustment of "feel" and "boost" • usb software updateability • revolutionary superBEC: constant 6V/3A output with 3.0V to 7.4V batteries • extra small size: 30.5x34mm Key features Pure Evolution • dismountable • EasySolderDesign • PreciSensorTM system• reproducible timing

Razer10 G2 Combo 3000kv 60A

Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01230kV Rating: 3000kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 198gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 3000kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box

Razer10 G2 Combo 3250kv 60A

Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01230kV Rating: 3250kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 204gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 3250kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box

Razer10 G2 Combo 4000kv 60A

Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01232kV Rating: 4000kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 207gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 4000kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box

Robitronic LED Programmerbox Razer ten + eight

This LED program box is for programming Robitronic Razer ten & eight ESCs. Its friendly interface makes ESC programming easy and quick. Its compact, portable and very applicable for field use.