A remote control car as a gift

Highlights:Scale 1:10Steel drive shaftsSpeed adjustment via remote control (High/Low)4WD2 electric drive motors6 shock absorbersOverheating protectionIPX4 splash water protectedproportional throttle and steering controlmassive front bumpereasy to steerReady-to-Run (RTR)forward - backward - right - leftrubber tyres with insertsfully sprung chassisextremely resilient, soft suspensionBall bearing drive46 mm high ground clearanceanodised aluminium axle pin holders v+hanodised aluminium front shock towersTop speed 45 km/h2.4 GHz remote controlIndoor/OutdoorScope of delivery:Sprint Truck 1:102.4 GHz remote controlUSB charging cableVehicle battery Lipo 7.4V 1600mAh3x AA batteries for the remote controlTechnical data:Dimensions: 345 x 305 x 165 mmScale: 1:10Battery: Lipo 7,4V 1600mAhWeight RTR: ~ 1705 gDriving time: ~ 10-15 min.Charging time: ~ 90-120 min.

The Subaru WRX 2004 was introduced by TAMIYA back then as kit 300058333. Now this model is available again on a TT-01E chassis.The TAMIYA 1/10 scale model has a powerful torque-tuned electric motor and all-wheel drive. This combination ensures fast and uncomplicated driving fun. The robust and detailed polycarbonate body of the TAMIYA Subaru WRX including decal sheet as well as the electronic speed controller are perfect for RC hobbyists.Scope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body.Technical details:- 1/10 scale kit model- encapsulated 4WD all-wheel drive- TT-01 Type E turntable chassis- prototypical, transparent Subaru WRX 2004 polycarbonate bodyshell- powerful 540 Torque Tuned electric motor- independent front and rear suspension- Differential gear v/h- Double wishbones v/h- friction damper- electronic speed controller- many tuning parts optionally availableadditionally needed- remote control with receiver- steering servo- drive battery- battery charger- Tamiya PS colors

Scope of delivery:Kit model with detailed illustrated assembly instructionsElectronic speed controller540 electric motorBody clearRequired accessories: Remote control with receiverSteering servo7.2V NiMH battery packbattery charger

BMW M4 GT3 EVO RC Kit 1:10 by TamiyaThe Tamiya BMW M4 GT3 EVO (item no. 58751) is a detailed RC kit in 1:10 scale based on the proven TT-02 chassis. The model combines faithful styling with robust engineering, making it suitable for beginners and experienced builders alike.BMW M4 GT3 EVO BodyThe unpainted polycarbonate body faithfully captures the distinctive look of the BMW M4 GT3 EVO: enlarged air intakes, newly designed headlights and tail lights, striking mirrors and an optimised rear wing. Separate housings for front and rear lights are included. Mirrors and rear wing stays are made from black ABS plastic. The newly designed black 5-spoke wheels (offset +2) match the original vehicle exactly and are combined with racing tyres.TT-02 Chassis TechnologySealed 4WD drive with central propshaftDouble wishbones and shock absorbers on all four wheelsWheelbase, ride height, track width and gear ratio all adjustableExtra-smooth chassis undersideBattery compartment compatible with all common battery typesWheel hubs with decorative brake disc insertsNumerous optional tuning parts availableTechnical SpecificationsScale: 1:10Length: 443 mmWidth: 188 mmHeight: 132 mmWheelbase: 257 mm (standard)Included in the BoxRC kit BMW M4 GT3 EVOTT-02 chassis540 Torque Tuned MotorElectronic speed controllerPolycarbonate body with partsBlack 5-spoke wheels with racing tyresIllustrated assembly manualRequired SeparatelyRadio transmitter with receiverSteering servo7.2 V NiMH battery packCharger (e.g. item no. 500500091)

Mitsubishi Lancer Evo V 1:10 RC Kit on the TT-02 ChassisTamiya presents the Mitsubishi Lancer Evo V as a reissue of the classic on the proven TT-02 4WD chassis. This beginner-friendly and extremely durable chassis features widely adjustable wheelbase, ground clearance, track width and gear ratio. Numerous optional tuning parts allow rapid development into a full racer. A visual highlight is the wheel hubs with attached brake disc replicas.Lancer Evo V Body and FeaturesThe authentic 1.0 mm polycarbonate body (from original kit 58461) is supplied unpainted and can be painted individually using Tamiya PS colors. ABS accessories such as side mirrors and a large rear wing are also included.Enclosed 4WD all-wheel drive with central driveshaftDouble wishbones and shock absorbers on all four wheelsElectronic speed controller and 540 Torque-Tuned motor12-spoke wheels with 26 mm tread tiresLength: 445 mm, Width: 185 mm, Height: 145 mm, Wheelbase: 257 mmIncluded in the BoxUnpainted polycarbonate body with ABS accessoriesElectronic speed controller540 Torque-Tuned motorShock absorbers and driveshaftTread tires on 12-spoke wheelsDetailed assembly manualRequired SeparatelyRadio system with receiver (not included)Steering servo (not included)7.2 V NiMH battery pack (not included)Charger (not included)Polycarbonate paint, e.g. Tamiya PS series (not included)

A Fighter, and a Winner!The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!DT-03 Chassis: Great Fun, Minimum FussThe stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.Specifications- Length: 400mm, Width: 248mm, Height: 132mm - Wheelbase: 287mm - Tread (Front/ Rear): 221mm/208mm - Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) - Monocoque Frame - Rear Wheel 2WD - 3-Bevel Differentials - 2-Piece Steering Tie-Rod - Front & Rear Double Wishbone Suspension - Gear Ratio = 9.28:1 - Type 540 Motor - Requires electronic speed controller (sold separately)Separately Required Items- 2-Channel R/C Unit with ESC- - Battery Pack & Charger - R6/AA/UM3 batteries for transmitter